Loading
Mehmet İskender ÖZSOY

Doç.Dr.

Mehmet İskender ÖZSOY

Mühendislik Fakültesi

Makine Mühendisliği Bölümü

İletişim

iozsoy@sakarya.edu.tr

+90 (264) 295 67 27

7-BİLDİRİLER :
1 FİDAN SİNAN,BORA MUSTAFA ÖZGÜR,ÜRGÜN SATILMIŞ,ÖZSOY MEHMET İSKENDER,KUTLUK TOGAYHAN - Synergistic Tribology of Laser-Textured 316L Stainless Steel with Spin-Coated TiO₂ Films under Reciprocating Sliding - İngilizce - 2025
2 ÖZSOY MEHMET İSKENDER - Experimental Investigation On Impact Properties Of Aramid/Glass Fiber Hybrid Composites - İngilizce - 2025
3 ÖZSOY MEHMET İSKENDER - Effects Of Fiber Layup And Energy Level On The Impact Tests Of Aramid/Carbon Fiber Hybrid Composites - İngilizce - 2025
4 ÖZSOY MEHMET İSKENDER - Effect of impacted surface on the low-velocity impact response of aramid/carbon/glass hybrid composites - İngilizce - 2025
5 ÖZSOY MEHMET İSKENDER - Evaluation of the energy absorption properties of carbon/glass/aramid fiber triple-hybrid composites - İngilizce - 2025
6 COŞKUN ÖZER,FİDAN SİNAN,BORA MUSTAFA ÖZGÜR,ÜRGÜN SATILMIŞ,ÖZSOY MEHMET İSKENDER - Parametric Study of Fiber-Laser Circular Microtextures on AA2024-T3: Influence of Scale Factor and Scan Speed on Wettability and Roughness - İngilizce - 2025
7 COŞKUN ÖZER,FİDAN SİNAN,BORA MUSTAFA ÖZGÜR,ÜRGÜN SATILMIŞ,ÖZSOY MEHMET İSKENDER - Fiber-Laser Square Texturing of AA2024-T3: Scale Factor and Scanning Speed Effects on Contact Angle and Surface Profilometry - İngilizce - 2025
1.1 A-SCI, SCI-E, SSCI VEYA AHCI KAPSAMINDAKİ DERGİLERDE YAYIMLANMIŞ MAKALE (Q1 OLARAK TARANAN DERGİDE) :
1 Fidan, S; Ürgün, S; Bora, MÖ; Özsoy, MI; - Scratch load and indenter type dependent scratch evaluation of milled carbon fiber filled basalt fiber/epoxy composites with factorial design - POLYMER COMPOSITES - Vol.46 - pp.2826 - ISSN : 0272-8397 - DOI : 10.1002/pc.29143 - FEB 20 - English - Article - 2025 - WOS:001330126100001
2 Demir, MM; Okutan, MS; Özsoy, MI; - Energy absorption properties of filament wound aluminum/CFRP hybrid tubes: Axial, lateral, and bending loadings - POLYMER COMPOSITES - Vol.0 - ISSN : 0272-8397 - DOI : 10.1002/pc.29727 - MAR 3 - English - Article - 2025 - WOS:001436364000001
3 Coskun, Ö; Fidan, S; Özsoy, MI; Bora, MÖ; Ürgün, S; Sahin, AE; Yilmaz, T; - Enhancing Wear Resistance and Adhesion of Primer Coatings on Laser-Textured Milled Carbon Fiber-Filled Basalt Composites - POLYMERS - Vol.17 - DOI : 10.3390/polym17091150 - APR 23 - English - Article - 2025 - WOS:001487548900001
4 Özsoy, MI; Fidan, S; Bora, MÖ; Ürgün, S; - Stacking Sequence Effect of Basalt/Carbon Hybrid Laminated Composites on Solid Particle Erosion Behavior: From Ambient to Elevated Temperatures - POLYMERS - Vol.17 - DOI : 10.3390/polym17101349 - MAY 15 - English - Article - 2025 - WOS:001495752700001
5 Yarar, E; Özsoy, MI; Fidan, S; Ürgun, S; Bora, MÖ; - Drilling Machinability of Glass, Basalt, and Hybrid Epoxy Composites: Thrust Force, Thermal Load, and Hole Quality - POLYMERS - Vol.17 - DOI : 10.3390/polym17121643 - JUN 13 - English - Article - 2025 - WOS:001514932900001
6 Fidan, S; Ürgün, S; Sahin, AE; Bora, MÖ; Yilmaz, T; Özsoy, MI; - Comprehensive Sliding Wear Analysis of 3D-Printed ABS, PLA, and HIPS: ANOVA, SEM Examination, and Wear Volume Measurements with Varying Layer Thickness - POLYMERS - Vol.17 - DOI : 10.3390/polym17141899 - JUL 9 - English - Article - 2025 - WOS:001539988000001
7 Özsoy, MI; Ürgün, S; Fidan, S; Yarar, E; Güleç, E; Bora, MÖ; - Machinability of Basalt and Glass Fiber Hybrid Composites in Dry Drilling Using TiN/TiAlN-Coated Drill Bits - POLYMERS - Vol.17 - DOI : 10.3390/polym17162172 - AUG 8 - English - Article - 2025 - WOS:001557500600001
8 Ozun, E; Ceylan, R; Bora, MÖ; Fidan, S; Ürgün, S; Özsoy, MI; Güleç, E; - Scratch Resistance and Tribological Enhancement of Epoxy Composites Reinforced with Chopped Glass Fiber and Nano Silica Through Taguchi Analysis - POLYMERS - Vol.17 - DOI : 10.3390/polym17182550 - SEP 21 - English - Article - 2025 - WOS:001579915700001
9 Fidan, S; Ürgün, S; Özsoy, MI; Bora, MÖ; Güleç, E; - Tribological Response of Glass Fiber/Polyester Composites After Pressurized Water-Immersion Aging Assessed by Reciprocating and Ball-on-Disc Wear Testing - POLYMERS - Vol.17 - DOI : 10.3390/polym17182503 - SEP 17 - English - Article - 2025 - WOS:001579887500001
10 Özsoy, MI; - Improving the energy absorption capabilities of carbon fiber/epoxy composites by embedding steel wire meshes - MATERIALS TESTING - Vol.0 - ISSN : 0025-5300 - DOI : 10.1515/mt-2025-0199 - OCT 10 - English - Article - 2025 - WOS:001589739400001
11 Özsoy, MI; - Low velocity impact behavior of carbon fiber/aluminum laminate (CARALL) hybrid composites - MATERIALS TESTING - Vol.0 - ISSN : 0025-5300 - DOI : 10.1515/mt-2025-0192 - OCT 28 - English - Article - 2025 - WOS:001600421200001
12 Ürgün, S; Fidan, S; Özsoy, MI; Bora, MÖ; - Decomposition of matrix in basalt fiber-reinforced composites using laser processing parameters for clear unveiling of fibers without damage - POLYMER COMPOSITES - Vol.46 - pp.4281 - ISSN : 0272-8397 - DOI : 10.1002/pc.29239 - APR 10 - English - Article - 2025 - WOS:001357469200001
13 Özsoy, MI; Fidan, S; Bora, MÖ; Ürgün, S; - Understanding the Damage Mechanisms of Basalt/Carbon Fiber Hybrid Composites Under Quasi-Static and Dynamic Loadings - POLYMERS - Vol.17 - DOI : 10.3390/polym17070866 - MAR 24 - English - Article - 2025 - WOS:001466988400001
14 Ürgün, S; Fidan, S; Özsoy, MI; Bora, MÖ; - Decomposition of matrix in basalt fiber-reinforced composites using laser processing parameters for clear unveiling of fibers without damage - POLYMER COMPOSITES - Vol.0 - ISSN : 0272-8397 - DOI : 10.1002/pc.29239 - NOV 7 - English - Article - 2024 - WOS:001357469200001
15 Fidan, S; Özsoy, MI; Ürgün, S; Bora, MÖ; - Scratch resistance of glass-basalt fiber reinforced epoxy hybrid composites: A comparative study - POLYMER COMPOSITES - Vol.0 - ISSN : 0272-8397 - DOI : 10.1002/pc.28610 - SEP 10 2024 - English - Article - 2024 - WOS:001235623800001
16 Fidan, S; Özsoy, MI; Bora, MO; Ürgün, S; - Advanced hybrid composites: A comparative study of glass and basalt fiber reinforcements in erosive environments - POLYMER COMPOSITES - Vol.0 - ISSN : 0272-8397 - DOI : 10.1002/pc.28619 - MAY 28 - English - Article - 2024 - WOS:001232117000001
17 Özsoy, MI; - Investigation of the energy absorption behavior and damage mechanisms of aramid/carbon/jute fiber hybrid epoxy composites - POLYMER COMPOSITES - Vol.0 - ISSN : 0272-8397 - DOI : 10.1002/pc.28583 - AUG 20 - English - Article - 2024 - WOS:001228582400001
18 Ürgün, S; Özsoy, MI; Bora, MÖ; Fidan, S; - Comparative evaluation of solid particle erosion resistance in milled carbon fiber-reinforced basalt fiber epoxy composites: Impact of abrasive shape variations - POLYMER COMPOSITES - Vol.0 - ISSN : 0272-8397 - DOI : 10.1002/pc.28949 - AUG 20 - English - Article - 2024 - WOS:001293716600001
19 Fidan, S; Uerguen, S; Bora, MO; Oezsoy, MI; - Scratch load and indenter type dependent scratch evaluation of milled carbon fiber filled basalt fiber/epoxy composites with factorial design - POLYMER COMPOSITES - Vol.0 - ISSN : 0272-8397 - DOI : 10.1002/pc.29143 - OCT 12 - English - Article - 2024 - WOS:001330126100001
20 Okutan, M. S.; Ozsoy, M. I.; Genel, K.; - Failure response of holed aluminum/glass hybrid composite tubes - ENGINEERING FAILURE ANALYSIS - Vol.149 - ISSN : 1350-6307 - DOI : 10.1016/j.engfailanal.2023.107271 - English - Article - 2023 - WOS:000988112500001
1.1 B-SCI, SCI-E, SSCI VEYA AHCI KAPSAMINDAKİ DERGİLERDE YAYIMLANMIŞ MAKALE (Q2 OLARAK TARANAN DERGİDE) :
1 Tastan, F; Okutan, MS; Ozsoy, MI; Genel, K; - On the bending resistance of inner and/or outer reinforced hybrid composite tubes: The effect of stacking sequence - MATERIALS TODAY COMMUNICATIONS - Vol.46 - DOI : 10.1016/j.mtcomm.2025.112913 - JUN - English - Article - 2025 - WOS:001516185000010
2 Yalçin, MM; Özsoy, MI; - Enhanced Crashworthiness Parameters of Nested Thin-Walled Carbon Fiber-Reinforced Polymer and Al Structures: Effect of Using Expanded Polypropylene Foam - APPLIED SCIENCES-BASEL - Vol.14 - DOI : 10.3390/app14219635 - NOV - English - Article - 2024 - WOS:001351093900001
3 Özsoy, MI; Yalçin, MM; - Lateral compression behavior of expanded polypropylene foam-filled carbon and glass fiber composite tubes - MATERIALS TESTING - ISSN : 0025-5300 - DOI : 10.1515/mt-2023-0120 - SEP 29 - English - Article - 2023 - WOS:001079067100001
4 Camci, Y; Turk, S; Gepek, E; Iyibilgin, O; Ozsoy, MI; - Fabrication and characterization of innovative chitosan/doxorubicin coated 3D printed microneedle patch for prolonged drug delivery - JOURNAL OF APPLIED POLYMER SCIENCE - Vol.139 - ISSN : 0021-8995 - DOI : 10.1002/app.52759 - English - Article - 2022 - WOS:000813646700001
1.1 C-SCI, SCI-E, SSCI VEYA AHCI KAPSAMINDAKİ DERGİLERDE YAYIMLANMIŞ MAKALE (Q3 OLARAK TARANAN DERGİDE) :
1 Yalçin, MM; Özsoy, MI; - Lateral compression behavior of expanded polypropylene foam-filled carbon fiber reinforced polymer and aluminum/carbon fiber reinforced polymer composite tubes: An experimental study - JOURNAL OF REINFORCED PLASTICS AND COMPOSITES - Vol.44 - pp.484 - ISSN : 0731-6844 - DOI : 10.1177/07316844231225034 - MAY - English - Article - 2025 - WOS:001133705300001
2 Yalçin, MM; Özsoy, MI; - Lateral compression behavior of expanded polypropylene foam-filled carbon fiber reinforced polymer and aluminum/carbon fiber reinforced polymer composite tubes: An experimental study - JOURNAL OF REINFORCED PLASTICS AND COMPOSITES - ISSN : 0731-6844 - DOI : 10.1177/07316844231225034 - DEC 28 - English - Article - 2023 - WOS:001133705300001
3 Ozsoy, Mehmet Iskender; Yalcin, Muhammet Muaz; Yaren, Mehmet Faruk; - Investigation on quasi-static compression of circular CFRP tubes: effect of EPP foam filling - JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING - Vol.45 - ISSN : 1678-5878 - DOI : 10.1007/s40430-023-04310-x - SEP - English - Article - 2023 - WOS:001043154300001
1.1 D-SCI, SCI-E, SSCI VEYA AHCI KAPSAMINDAKİ DERGİLERDE YAYIMLANMIŞ MAKALE (Q4 OLARAK TARANAN DERGİDE) :
1 Ozsoy, I; Mimaroglu, A; Unal, H; - Experimental and theoretical study of the rubbing process of epoxy composites against steel - MATERIALS TESTING - Vol.59 - pp.563 - ISSN : 0025-5300 - DOI : 10.3139/120.111042 - English - Article - 2017 - WOS:000402542500008
2 Ozsoy, I; Mimaroglu, A; Unal, H; - Influence of micro- and nanofiller contents on friction and wear behavior of epoxy composites - SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS - Vol.24 - pp.485 - ISSN : 0792-1233 - DOI : 10.1515/secm-2014-0262 - English - Article - 2017 - WOS:000405314100002
3 Ozsoy, I; Mimaroglu, A; Unal, H; - Comparison of the tribological and mechanical performance for nano and micro filler epoxy composites - MATERIALS TESTING - Vol.58 - pp.526 - ISSN : 0025-5300 - DOI : 10.3139/120.110893 - English - Article - 2016 - WOS:000377126200005
4 Ozsoy, N; Mimaroglu, A; Ozsoy, M; Ozsoy, MI; - Comparison of Mechanical Behaviour of Carbon and Glass Fiber Reinforced Epoxy Composites - ACTA PHYSICA POLONICA A - Vol.127 - pp.1032 - ISSN : 0587-4246 - English - Article; Proceedings Paper - 2015 - WOS:000357937100047
5 Ozsoy, I; Demirkol, A; Mimaroglu, A; Unal, H; Demir, Z; - The Influence of Micro- and Nano-Filler Content on the Mechanical Properties of Epoxy Composites - STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING - Vol.61 - pp.601 - ISSN : 0039-2480 - DOI : 10.5545/sv-jme.2015.2632 - English - Article - 2015 - WOS:000371228800006
6 Unal, H; Ozsoy, I; Mimaroglu, A; - Evaluation of the sliding performance of polyamide, poly-oxy-methylene and their composites - INTERNATIONAL JOURNAL OF MATERIALS RESEARCH - Vol.104 - pp.987 - ISSN : 1862-5282 - DOI : 10.3139/146.110946 - OCT - English - Article - 2013 - WOS:000326126800008
1.2-ESCI VE/VEYA SCOPUS KAPSAMINDAKİ DERGİLERDE YAYIMLANMIŞ MAKALE :
1 Ozsoy, Mehmet Iskender; - Investigation of the mechanical properties of carbon and basalt fiber laminated hybrid epoxy composites - PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI - Vol.28 - pp.499 - ISSN : 1300-7009 - DOI : 10.5505/pajes.2021.42387 - English - Article - 2022 - WOS:000859055800014
2 I Ozsoy, N Ozsoy, H Unal, A Mimaroglu - Evaluation of the influences of wax content on the tribological and mechanical performance of polytetrafluoroethylene-blended polyamide - Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology - Vol.227(12) - pp.1399 - ISSN : 1350-6501 - DOI : 10.1177/1350650113495530 - 2013
3 HÜSEYİN ÜNAL,MEHMET İSKENDER ÖZSOY,ABDULLAH MİMAROĞLU - Evaluation of the sliding performance of polyamide poly oxy methylene and their composites - International Journal of Materials Research - Vol.104(10) - pp.987 - ISSN : 1862-5282 - DOI : 10.3139/146.110946 - 2013
1.3-ÜAK VE SAKARYA ÜNİVERSİTESİ SENATOSU TARAFINDAN BELİRLENEN ULUSLARARASI ALAN ENDEKSLERİNDE TARANAN DERGİLERDE YAYIMLANMIŞ VEYA ULAKBİM, TR-DİZİN TARAFINDAN TARANAN ULUSAL HAKEMLİ DERGİLERDE YAYIMLANMIŞ MAKALE :
1 Özsoy, M. - Impactor Diameter and Ply Number Effects on the Impact Behavior of Carbon Fiber Composite Laminates - Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - pp.439 - DOI : 10.29109/gujsc.1122188 - eng - paper - 2022 - TRDizin
2 Özsoy, M. - Investigation of the mechanical properties of carbon and basalt fiber laminated hybrid epoxy composites - Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi - pp.499 - DOI : 10.5505/pajes.2021.42387 - eng - paper - 2022 - TRDizin
3 Özsoy, M., Esatoğlu, L. - Friction and Wear Properties of Glass Fiber Reinforced Polyphenylene Sulfide Composites - Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi - pp.965 - DOI : 10.16984/saufenbilder.731914 - eng - paper - 2020 - TRDizin
4 Ulu, Y., Özsoy, M. - Traktörlerde Kullanılan Teknolift Mandalının Ergonomik Olarak Geliştirilmesi - Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi - pp.691 - ISSN : 1302-9304 - DOI : 10.21205/deufmd.2020226604 - tur - paper - 2020 - TRDizin
1.4-DİĞER ULUSLARARASI HAKEMLİ DERGİLERDE YAYIMLANMIŞ BİLİMSEL/SANATSAL MAKALE :
1 Mehmet İskender ÖZSOY - Impactor Diameter and Ply Number Effects on the Impact Behavior of Carbon Fiber Composite Laminates - Gazi University Journal of Science Part C: Design and Technology - Vol.10 - pp.439 - 2022
7.2-ULUSLARARASI KONGRE VE SEMPOZYUMLARDA SÖZLÜ OLARAK SUNULAN VE TAM METİN OLARAK YAYIMLANAN TEBLİĞ :
1 FİDAN SİNAN,ÜRGÜN SATILMIŞ,BORA MUSTAFA ÖZGÜR,ÖZSOY MEHMET İSKENDER - Laser Surface Treatment Effect on the Wettability of 5754 Aluminum Alloys Under Various Gas Atmosphere - 2025
2 FİDAN SİNAN,BORA MUSTAFA ÖZGÜR,ÜRGÜN SATILMIŞ,ÖZSOY MEHMET İSKENDER - Effect of Laser Surface Texturing Under Controlled Atmospheres on the Wettability of Ti6Al4V Alloy - 2025
3 FİDAN SİNAN,ÜRGÜN SATILMIŞ,BORA MUSTAFA ÖZGÜR,ÖZSOY MEHMET İSKENDER - Optimizing Laser-Textured Surface Patterns for Hydrophobic and Hydrophilic Control of 316L Steel in Air and Nitrogen - 2025
4 FİDAN SİNAN,BORA MUSTAFA ÖZGÜR,ÜRGÜN SATILMIŞ,ÖZSOY MEHMET İSKENDER - Curved Surface Fiber Laser Texturing of Ti6Al4V (Grade 5) Titanium Alloy and the Influence of Laser Parameters on Surface Morphology and Roughness Characteristics - 2025
5 ÜRGÜN SATILMIŞ,BORA MUSTAFA ÖZGÜR,FİDAN SİNAN,ÖZSOY MEHMET İSKENDER - Experimental Investigation of Surface Roughness in 316L Rolled Stainless Steel After Fiber Laser Engraving Using Design of Experiments Approach - 2025
6 ÖZSOY MEHMET İSKENDER - Carrying Out The Drop Weight Impact Tests Of Carbon And Basalt Fiber Reinforced Polymer Composites - 2025
7 ÖZSOY MEHMET İSKENDER - Evaluation Of Tensile Properties Of Carbon/Basalt Fiber Hybrid Epoxy Composites Subjected To Hygrothermal Aging - 2025
8 ÖZSOY MEHMET İSKENDER,FİDAN SİNAN,ÜRGÜN SATILMIŞ,BORA MUSTAFA ÖZGÜR - Effect of Fiber Laser Parameters on the Frictional Behavior of Ti6Al4V Alloy under Reciprocating Sliding Conditions - 2025
9 ÖZSOY MEHMET İSKENDER,FİDAN SİNAN,ÜRGÜN SATILMIŞ,BORA MUSTAFA ÖZGÜR - Reciprocating Sliding Wear Behavior of the 316l Stainless Steel Under Various Test Parameters - 2025
10 ÖZSOY MEHMET İSKENDER - Mechanical Investigation and Cost Evaluation of Glass Basalt Fiber Composites Tensile Bending and Impact Loadings - 2025
11 KÖSE FATMA ZEHRA,ÖZSOY MEHMET İSKENDER,TÜRK SERBÜLENT - Investigation Of The Effects Of Coating 316l Stainless Steel With Polymer And Alumina On Implant Properties - 2024
12 FİDAN SİNAN,ÜRGÜN SATILMIŞ,BORA MUSTAFA ÖZGÜR,ÖZSOY MEHMET İSKENDER - Effect of Fiber Laser Parameters on Surface Roughness, Line Morphology and Surface Topography of 6061-T6 Aluminum Alloy on Curved Surfaces - 2024
13 ÜRGÜN SATILMIŞ,FİDAN SİNAN,BORA MUSTAFA ÖZGÜR,ÖZSOY MEHMET İSKENDER - Advanced Smoke Detection Technique in Laser Surface Texturing of Basalt Fiber Reinforced Epoxy Composites - 2024
14 FİDAN SİNAN,ÜRGÜN SATILMIŞ,ÖZSOY MEHMET İSKENDER,BORA MUSTAFA ÖZGÜR - Fiber Laser Induced Texturing Geometric Effects on 316L Stainless Steel: Surface Morphology and Roughness Assessment - 2024
15 FİDAN SİNAN,ÜRGÜN SATILMIŞ,BORA MUSTAFA ÖZGÜR,ÖZSOY MEHMET İSKENDER - Effect of Laser Sintering Parameters: Including Hatch Distance and Scanning Angle on Surface Characteristics of 6061-T6 Aluminum Alloy on Curved Surfaces - 2024
16 FİDAN SİNAN,ÜRGÜN SATILMIŞ,BORA MUSTAFA ÖZGÜR,ÖZSOY MEHMET İSKENDER - Laser Surface Texturing Parameters and Their Influence on Surface Roughness in Basalt Fiber Reinforced Epoxy Composites - 2024
17 ÜRGÜN SATILMIŞ,FİDAN SİNAN,ÖZSOY MEHMET İSKENDER,BORA MUSTAFA ÖZGÜR - Investigation of the Effects of CO2 Laser Processing Parameters on Kerf Width and Depth in Basalt Fiber Reinforced Epoxy Composites - 2024
18 ÜRGÜN SATILMIŞ,FİDAN SİNAN,ÖZSOY MEHMET İSKENDER,BORA MUSTAFA ÖZGÜR - Fiber Laser Peening of Ti6Al4V Alloy Considering the Effects of Laser Power, Scan Speed and Overlap Rate on Surface Morphology and Roughness - 2024
19 TÜRK SERBÜLENT, ÖZSOY MEHMET İSKENDER - Surface characterization of CNT coated aluminum alloy - 2023
20 AK Furkan Kerem, DAL HÜSEYİN, ÖZSOY MEHMET İSKENDER - KOMPOZİT MALZEMELERİN AKUSTİK ÖZELLİKLERİNİN İNCELENMESİ - 2022
21 FURKAN KEREM AK, HÜSEYİN DAL, MEHMET İSKENDER ÖZSOY - Kompozit malzemelerin akustik özelliklerinin incelenmesi - 2022
22 İYİBİLGİN OSMAN,ÖZSOY MEHMET İSKENDER,GEPEK ENGİN,FINDIK FEHİM - Manufacturing of composite materials via 3D printers: Materialsselection and process optimization - 2020
23 ÖZSOY MEHMET İSKENDER,ESATOĞLU LEVENT - Sliding wear behavior of carbon fiber reinforced polyphenylenesulfide composites - 2020
7.3-ULUSLARARASI KONGRE VE SEMPOZYUMLARDA SÖZLÜ OLARAK SUNULAN VE ÖZET METİN OLARAK YAYIMLANAN TEBLİĞ :
1 ÖZSOY MEHMET İSKENDER - Effect of steel wire mesh on mechanical and impact performance of basalt fiber/epoxy composites - 2023
2 ÖZSOY MEHMET İSKENDER - INFLUENCE OF MILLED CARBON FIBER FILLERS ON MECHANICAL PROPERTIES OF JUTE FIBER REINFORCED EPOXY COMPOSITES - 2023
3.4-ULUSLARARASI YAYINEVLERİ TARAFINDAN YAYIMLANMIŞ ÖZGÜN KİTAPTA BÖLÜM YAZARLIĞI :
1 Osman ˙İyibilgin, Serbülent Türk, Mehmet ˙İskender Özsoy, Fehim Fındık, Mahmut Özacar - CARTILAGE TISSUE AND KNEE JOINT BIOMECHANICS Fundamentals, Characterization and Modelling - Academic Press - pp.593-609 - 2023
2 Mehmet İskender Özsoy, Serbülent Türk, Fehim Fındık, Mahmut Özacar - NANOTECHNOLOGY IN THE AUTOMOTIVE INDUSTRY - Elsevier - 2022
2.13 A-BAŞARIYLA TAMAMLANAN YÜKSEKÖĞRETİM KURUMLARI TARAFINDAN DESTEKLENMİŞ BİLİMSEL ARAŞTIRMA PROJESİNDE (YALNIZCA AR-GE NİTELİĞİNDEKİ PROJELER-LİSANSÜSTÜ TEZ PROJELERİ HARİÇ) YÜRÜTÜCÜ OLMAK :
1 MEHMET İSKENDER ÖZSOY, İBRAHİM KUTAY YILMAZÇOBAN - Havacılık Sektörüne Yönelik Organik Katkılı Kompozit Yapıların Üretilmesi ve Mekanik Açıdan İncelenmesi - Vol.40.000.00 TL - DOI : Tamamlandı - 2017-01- 06-027 - 2019
2 Mehmet İskender ÖZSOY - Elyaf Katkılı Kompozitlerin Mekanik Özelliklerinin Güçlendirilmesi (HIZLI DESTEK) - Vol.10.000.00 TL - DOI : Tamamlandı - 2018-3-12- 239 - 2019
3 Abdullah MİMAROОLU,Mehmet İskender öZSOY - Polimer Esaslı Nano ve Makro Kompozit Malzemelerin Tribolojik ve Mekanik özelliklerinin İncelenmesi ve Modellenmesi - Vol.4000 - DOI : Durduruldu - 3 - 2010 - SAU-FBDTEZ -2010-50-02-004
4 Abdullah MİMAROОLU,Mehmet İskender öZSOY - Y32 bojisinin bilgisayar destekli statik ve dinamik analizi - Vol.1500 - DOI : Devam Ediyor - 2 - 2008 - SAU-FBYLTEZ -2008-50-01-009
2.13 B-BAŞARIYLA TAMAMLANAN YÜKSEKÖĞRETİM KURUMLARI TARAFINDAN DESTEKLENMİŞ BİLİMSEL ARAŞTIRMA PROJESİNDE (YALNIZCA AR-GE NİTELİĞİNDEKİ PROJELER) ARAŞTIRMACI OLMAK :
1 SİNAN FİDAN, MUSTAFA ÖZGÜR BORA, SATILMIŞ ÜRGÜN, MEHMET İSKENDER ÖZSOY - DOĞAL ELYAFKUMAŞ KATKILI KARBON VE CAM TABAKALIHİBRİT KOMPOZİTLERİN ÜRETİMİ ÜRETİM SONRASI KAT DİZİLİMİNİN EROZİF AŞINMA VE EĞİLME DAVRANIŞINA ETKİSİ - Vol.199.734,66 ? - DOI : Tamamlandı - FKA-2024-3717 - 2025
2 Akın AKINCI, Mehmet İskender ÖZSOY, Batıkan Bozkurt KURŞAD, Murat ÖZSOY - Otomativ Endüstrisine Yönelik Doğal ve Sentetik Fiber Takviyeli Polimer Matriksli Hafif Kompozit Malzeme Üretimi ve Özelliklerinin İncelenmesi - DOI : Tamamlandı - 2017-01-08-042 - 2019
3 Abdullah MİMAROĞLU Neslihan ÖZSOY, Mehmet İskender ÖZSOY - Nano Katkılı Kompozit Malzemelerin Mekanik, Aşınma ve Sürtünme Davranışlarının Bilgisayar Dayalı Modellenmesi ve Deneysel İncelenmesi - DOI : Tamamlandı - 2010-01-06-005 - 2013
4 Abdullah MİMAROОLU,Neslihan öZSOY, İskender öZSOY - Nano Katkılı Kompozit Malzemelerin Mekanik, Aşınma ve Sürtünme Davranışlarının Bilgisayar Dayalı Modellenmesi ve Deneysel İncelenmesi - Vol.24000 - DOI : Devam Ediyor - 7 - 2010 - SAU-BAP -2010-01-06-005
12.2-YÖNETİMİNDE TAMAMLANAN HER YÜKSEK LİSANS TEZİ İÇİN :
1 İMPLANT MALZEMELERİNİN MEKANİK ÖZELLİKLERİNİN GELİŞTİRİLMESİ - Fatma Zehra KÖSE - SAKARYA ÜNİVERSİTESİ - FEN BİLİMLERİ ENSTİTÜSÜ - Biyomedikal Mühendisliği - 2024
2 Elyaf takviyeli Pps kompozitlerinin sürtünme ve aşınma karakterizasyonu - LEVENT ESATOĞLU - Sakarya Üniversitesi - Fen Bilimleri Enstitüsü - Makine Tasarım ve İmalat - 2018
3 Traktörlerde kullanılan teknolift mandalının ergonomik olarak geliştirilmesi - YASİN ULU - Sakarya Üniversitesi - Fen Bilimleri Enstitüsü - Makine Tasarım ve İmalat - 2018
13.2-LİSANS DÜZEYİNDE DERS VERMEK. (SON 3 YILDA HER DERS İÇİN, HER YIL İÇİN EN FAZLA 5 DERS) :
1 Mukavemet 1 - pp.3 - ISSN : 1 - 1 - 2024
2 Bilgisayar destekli teknik resim - pp.4 - ISSN : 2 - 1 - 2024
3 Statik - pp.3 - ISSN : 1 - 1 - 2024
4 Teknik Resim - pp.4 - ISSN : 1 - 1 - 2023
5 Dinamik - pp.3 - ISSN : 0 - 0 - 2023
15.8-AÇIK ERİŞİM DERGİSİNDE YAYIN (HER YAYIN İÇİN) :
1 Decomposition of matrix in basalt fiber-reinforced composites using laser processing parameters for clear unveiling of fibers without damage SATILMIŞ ÜRGÜN,SİNAN FİDAN,MEHMET İSKENDER ÖZSOY,MUSTAFA ÖZGÜR BORA , Yayın Yeri:POLYMER COMPOSITES , 2025 Uluslararası Hakemli SCI-Expanded Özgün Makale https://dx.doi.org/10.1002/pc.29239 - 2025
2 Scratch load and indenter type dependent scratch evaluation of milled carbon fiber filled basalt fiber/epoxy composites with factorial design SİNAN FİDAN,SATILMIŞ ÜRGÜN,MUSTAFA ÖZGÜR BORA,MEHMET İSKENDER ÖZSOY , Yayın Yeri:POLYMER COMPOSITES , 2025 Uluslararası Hakemli SCI-Expanded Özgün Makale https://dx.doi.org/10.1002/pc.29143 - 2025
3 Energy absorption properties of filament wound aluminum/CFRP hybrid tubes: Axial, lateral, and bending loadings MEHMET MURAT DEMİR,MUSTAFA SAİD OKUTAN,MEHMET İSKENDER ÖZSOY , Yayın Yeri:POLYMER COMPOSITES , 2025 - 2025
4 Understanding the Damage Mechanisms of Basalt/Carbon Fiber Hybrid Composites Under Quasi-Static and Dynamic Loadings MEHMET İSKENDER ÖZSOY,SİNAN FİDAN,MUSTAFA ÖZGÜR BORA,SATILMIŞ ÜRGÜN , Yayın Yeri:Polymers , 2025 Uluslararası Hakemli SCI-Expanded Özgün Makale https://dx.doi.org/10.3390/polym17070866 - 2025
5 Scratch resistance of glass‐basalt fiber reinforced epoxy hybrid composites: A comparative study SİNAN FİDAN,MEHMET İSKENDER ÖZSOY,SATILMIŞ ÜRGÜN,MUSTAFA ÖZGÜR BORA , Yayın Yeri:Polymer Composites , 2024 Uluslararası Hakemli SCI-Expanded Özgün Makale https://dx.doi.org/10.1002/pc.28610 - 2024
6 Enhanced Crashworthiness Parameters of Nested Thin-Walled Carbon Fiber-Reinforced Polymer and Al Structures: Effect of Using Expanded Polypropylene Foam MUHAMMET MUAZ YALÇIN,MEHMET İSKENDER ÖZSOY , Yayın Yeri:Applied Sciences , 2024 Uluslararası Hakemli SCI-Expanded Özgün Makale https://dx.doi.org/10.3390/app14219635 - 2024
7 Investigation of the energy absorption behavior and damage mechanisms of aramid/carbon/jute fiber hybrid epoxy composites MEHMET İSKENDER ÖZSOY , Yayın Yeri:Polymer Composites , 2024 Uluslararası Hakemli SCI-Expanded Özgün Makale https://dx.doi.org/10.1002/pc.28583 - 2024
8 Advanced hybrid composites: A comparative study of glass and basalt fiber reinforcements in erosive environments SİNAN FİDAN,MEHMET İSKENDER ÖZSOY,MUSTAFA ÖZGÜR BORA,SATILMIŞ ÜRGÜN , Yayın Yeri:Polymer Composites , 2024 Uluslararası Hakemli SCI-Expanded Özgün Makale https://dx.doi.org/10.1002/pc.28619 - 2024
9 Comparative evaluation of solid particle erosion resistance in milled carbon fiber-reinforced basalt fiber epoxy composites: Impact of abrasive shape variations SATILMIŞ ÜRGÜN,MEHMET İSKENDER ÖZSOY,MUSTAFA ÖZGÜR BORA,SİNAN FİDAN , Yayın Yeri:POLYMER COMPOSITES , 2024 Uluslararası Hakemli SCI-Expanded Özgün Makale https://dx.doi.org/10.1002/pc.28949 - 2024
15.9-KİŞİSEL ORCID NUMARASI ALINMASI :
1 https://orcid.org/0000-0001-6777-4818 - 2022
KİTAPLAR
Cartilage Tissue and Knee Joint Biomechanics
Cartilage Tissue and Knee Joint Biomechanics
Nanotechnology in The Automotive Industry
BİLDİRİLER
Effect of Fiber Laser Parameters on Surface Roughness, Line Morphology and Surface Topography of 6061-T6 Aluminum Alloy on Curved Surfaces
Effect of Laser Sintering Parameters: Including Hatch Distance and Scanning Angle on Surface Characteristics of 6061-T6 Aluminum Alloy on Curved Surfaces
Fiber Laser Peening of Ti6Al4V Alloy Considering the Effects of Laser Power, Scan Speed and Overlap Rate on Surface Morphology and Roughness
Investigation of the Effects of CO2 Laser Processing Parameters on Kerf Width and Depth in Basalt Fiber Reinforced Epoxy Composites
Investigation Of The Effects Of Coating 316l Stainless Steel With Polymer And Alumina On Implant Properties
Advanced Smoke Detection Technique in Laser Surface Texturing of Basalt Fiber Reinforced Epoxy Composites
Fiber Laser Induced Texturing Geometric Effects on 316L Stainless Steel: Surface Morphology and Roughness Assessment
Laser Surface Texturing Parameters and Their Influence on Surface Roughness in Basalt Fiber Reinforced Epoxy Composites
INFLUENCE OF MILLED CARBON FIBER FILLERS ON MECHANICAL PROPERTIES OF JUTE FIBER REINFORCED EPOXY COMPOSITES
Surface characterization of CNT coated aluminum alloy
Effect of steel wire mesh on mechanical and impact performance of basalt fiber/epoxy composites
KOMPOZİT MALZEMELERİN AKUSTİK ÖZELLİKLERİNİN İNCELENMESİ
Sliding wear behavior of carbon fiber reinforced polyphenylenesulfide composites
Manufacturing of composite materials via 3D printers: Materialsselection and process optimization
ARAŞTIRMA PROJELERİ
DOĞAL ELYAFKUMAŞ KATKILI KARBON VE CAM TABAKALI HİBRİT KOMPOZİTLERİN ÜRETİMİ ÜRETİM SONRASI KAT DİZİLİMİNİN EROZİF AŞINMA VE EĞİLME DAVRANIŞINA ETKİSİ
İmplant Malzemelerinin Mekanik Özelliklerininİyileştirilmesi
Elyaf Katkılı Kompozitlerin Mekanik Özelliklerinin Güçlendirilmesi (HIZLI DESTEK)
Y32 bojisinin bilgisayar destekli statik ve dinamik analizi
Experimental investigations of ICT-enabled robotized manufacturing system with 3-D printing
SAÜ BAPK_Havacılık Sektörüne Yönelik Organik Katkılı Kompozit Yapıların Üretilmesi ve Mekanik Açıdan İncelenmesi
Termoplastik Malzemelerin Aşınma ve Sürtünme Davranışlarının İncelenmesi
Nano Katkılı Kompozit Malzemelerin Mekanik, Aşınma ve Sürtünme Davranışlarının Bilgisayar Dayalı Modellenmesi ve Deneysel İncelenmesi
Polimer Esaslı Nano ve Makro Kompozit Malzemelerin Tribolojik ve Mekanik Özelliklerinin İncelenmesi ve Modellenmesi
MAKALELER
Enhanced Crashworthiness Parameters of Nested Thin-Walled Carbon Fiber-Reinforced Polymer and Al Structures: Effect of Using Expanded Polypropylene Foam
Investigation of the energy absorption behavior and damage mechanisms of aramid/carbon/jute fiber hybrid epoxy composites
Advanced hybrid composites: A comparative study of glass and basalt fiber reinforcements in erosive environments
Scratch load and indenter type dependent scratch evaluation of milled carbon fiber filled basalt fiber/epoxy composites with factorial design
Scratch resistance of glass‐basalt fiber reinforced epoxy hybrid composites: A comparative study
Comparative evaluation of solid particle erosion resistance in milled carbon fiber-reinforced basalt fiber epoxy composites: Impact of abrasive shape variations
Lateral compression behavior of expanded polypropylene foam-filled carbon fiber reinforced polymer and aluminum/carbon fiber reinforced polymer composite tubes: An experimental study
Lateral compression behavior of expanded polypropylene foam–filled carbon and glass fiber composite tubes
Investigation on quasi-static compression of circular CFRP tubes: effect of EPP foam filling
Failure response of holed aluminum/glass hybrid composite tubes
Impactor Diameter and Ply Number Effects on the Impact Behavior of Carbon Fiber Composite Laminates
Fabrication and characterization of innovative chitosan/doxorubicin coated 3D printed microneedle patch for prolonged drug delivery
Investigation of the mechanical properties of carbon and basalt fiber laminated hybrid epoxy composites
Traktörlerde Kullanılan Teknolift Mandalının Ergonomik Olarak Geliştirilmesi
Friction and wear properties of glass fiber reinforced polyphenylene sulfide composites
Influence of micro- and nanofiller contents on friction and wear behavior of epoxy composites
Experimental and theoretical study of the rubbing process of epoxy composites against steel
Comparison of the tribological and mechanical performance for nano and micro filler epoxy composites
Comparison of Mechanical Behaviour of Carbon and Glass Fiber Reinforced Epoxy Composites
The Influence of Micro and Nano Filler Content on the Mechanical Properties of Epoxy Composites
Evaluation of the sliding performance of polyamide poly oxy methylene and their composites
Evaluation of the influences of wax content on the tribological and mechanical performance of polytetrafluoroethylene-blended polyamide
UZMANLIK ALANLARI
Katı Cisimler Mekaniği ,Kompozit Malzemeler ,Sonlu Elemanlar Analizi